Submersible motors are the heart of water pumping systems used across agriculture, industry, and domestic sectors. Yet one of the most frequent and expensive issues users face is motor burnout.
While dry running, overloading, and electrical faults are common culprits, a key internal factor is often ignored — the quality of the winding wire.
In this blog, we’ll explain how substandard submersible winding wire leads to motor failure, and how GOLDENGRIP, a patented winding wire by VOLTSON INDIA, prevents such accidents — trusted across India and 50+ countries worldwide.
What Causes Submersible Motor Burnout?
Submersible motors can burn out due to:
- Dry running or low water level
- Voltage fluctuations and phase loss
- Prolonged overheating
- Substandard insulation inside the motor
In nearly 70% of motor failures, it’s not the pump — it’s the winding wire that fails first, triggering insulation breakdown, internal shorts, or electrical faults.
Why Winding Wire Quality is Critical
The submersible winding wire must perform in extreme conditions:
- Constant water immersion
- High temperature buildup inside the motor
- Electrical stress from frequent start-stops or VFDs
If the insulation fails, it causes:
- Motor winding short-circuit
- High current draw and overheating
- Total motor burnout and replacement cost
This is where GOLDENGRIP makes all the difference.
GOLDENGRIP – Patented Winding Wire That Prevents Burnout
GOLDENGRIP, developed by VOLTSON INDIA, is a high-temperature, triple-insulated submersible winding wire designed to resist heat, moisture, and electrical stress — ensuring maximum motor protection.
GOLDENGRIP Key Features:
| Feature | Advantage |
|---|---|
| 🔥 Working Temp: 140°C | Handles extended operation in Indian summers or Middle East regions |
| ⚡ Short Circuit Temp: 200°C | No insulation failure during surge or voltage fluctuation |
| 💧 BOPP Triple-Layer Tape Insulation | 100% waterproof, ideal for deep well pumps |
| 🔌 High Dielectric Strength | Suitable for high-load or VFD motors |
| 📜 Complies with BIS & IEC Standards | Trusted by Indian and global OEMs |
Where GOLDENGRIP Is Used
GOLDENGRIP winding wires are widely used in:
- India – Across Gujarat, Maharashtra, Punjab, Tamil Nadu, Karnataka & more
- Middle East – Saudi Arabia, UAE, Iran, Turkey, Kuwait, Oman, Jordan
- Africa – Egypt, Algeria, South Africa, Ethiopia
- Latin America & Southeast Asia
Whether it's an agriculture pump in Gujarat, a borewell system in Maharashtra, or a municipal project in UAE, GOLDENGRIP has delivered reliable performance with reduced motor failures.